SPECIFICATION OF CB100-100-125Z Capacity:100m³/h Head:12.5m Speed:2600r/min Suction:7-9m Power:5.9kw / 8hp CB100-100-125Z pump of our company is a singal stage centrifugal pump, manufacture in strict accordance with the standard JB/T6663.1-93, which mainly consist of impeller\casing\sealing\bearing body etc, apply to convey clear water or others whose properties similar to water. The medium temperature can't exceed 176 centigrade. It has one type of drive, it is the power machine and pump rotate through the pulley. The power machine can be the diesel engine or electric engine, the user can select as required. Scope Primarily supporting the use of light-small sprinkling machine, and fixed permanent or semi-permanent sprinkler system, widely applied to irrigation of various farmlands, orchards, vegetable farms and nursery garden, it can also use in pump unit for water supply and drain of urban construction, factory and mine. Principle You should fill the pump with water before start, then the impeller rotate with high speed under the engine, when the impeller turns, the water pressure at the entrance of impeller reducing and the entrance of the impeller lower than atmosphere pressure. While the water pressure along the direction of impeller radius ceaselessly rising and outdistance atmosphere pressure, formed a certain suction in water inlet. Under atmosphere pressure, the lower water push the inflow valve, enter into pump case along water inlet, dumped into water outlet by impeller. So that the lower water can be continuously carried to high. Use and maintenance 1. You should make the pump working in the standard rotate speed in use process, don't speed up at will, in order to avoid potential safety hazard and impact the useful life of the pump. 2. Direct coupled type pump units: The chassis must remain stable, so as not to damage the coupling. Belt wheel type pump units: The two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially. 3. Pump mounting height(in order to suction the water tank as the base)should be less than the permit smoking on 1-2meter high vacum. 4. You should stop the engine if you discover abnormalities(such as noise, shock, hydraulic discharge descend etc. ), and attention the bearing heat up, the temperature can't exceed 75 centigrade. 5. If stop using for a long time, you should discharge the water in the pump, overhaul and oil, keep it in a dry and ventilate shade. In winter, you should discharge the water at once when you stop using it in case frost crack. 6. After the pump every 1000 hours operating time, you should take down and clean the bearing, and exchange quick-wear parts.
JIANGSU GUONONG PUMP Co., Ltd is located in tri-angle economic island, Our company mainly specialized in producing Self-Priming Pump, Centrifugal Pump, Sand Inhaling Pump, Spray Irrigation Unit, Plastic-coated Hose. We are also contracting sprinkler irrigation and drip irrigation, mircro sprinkler irrigation, the botanical garden afforest station and so on many kinds of forms of waters saving irrigation enginerring design, construction, installation.
Enjoying the superior geographic location, rigorous technological method and complete facilities, we pruduce 100 thousand water pumps per year. The pumps which we are producing can be fitted with 2-30horsepower diesel engine or 1.5-22 kilowatt electric motor, the annual output of 3 million meters of plastic-coated hose can match different water pump pipe's diameter.
Honestly welcome the cooperation from the customers both at home and abroad.