This two station armature balancing machine has two working stations,one station for balancing,one station for cutting.It is simple operation and simple tooling change. High efficiency and stable performance.
2 sides balancing testing, synthesize unbalancing display, over-tolerance automatic alert
Armature not need to mark, directly put imachine
Single step operate, adjust; Malfunctioself diagnose
Random angle analysis, automatically calculate the cutting weight
Tracebility for sampling data, balancing data, operator information.
Balancing armature weight range: 200~2000g
Armature outer diameter range: 25~60mm
Armature length range: 60~180mm
Max cutting depth: 3mm
Minimum acquirable residual unbalancing & #118alue: 0.3gmm/kg
Unbalancing reduce rate URR: & Ge; 90%
Productioefficiency: 16s/PC
Technical specification:
Item |
Remark |
Main configuration |
Cylinder:SMC |
Servo motor: Mitsubishi |
Sensor:KEYENCE, OMRON, KORI |
Touch screen: Schneider |
PLC: SIEMENS |
Stepping motor: Oriental motor or SANYO |
Armature range |
Weight: less than 1.6Kg |
Lamination length: 20-60mm |
Diameter: 25-40mm (II type machine) 40-60mm (III type machine) |
Balancing speed |
1000-2200RPM |
Cutting method |
R shape cutter or V shape cutter Cutting depth and length could be controlled |
Power source |
AC380V 50Hz |
Air source |
0.4~0.6Mpa |
Initial unbalance value |
Depends on armature diameter and cutting depth, for example, ∮32mm armature, single cutting position ≤500mg,,∮40mm armature, single cutting position≤500mg |
Pitch time (R type cutter) |
12~14 S/PC (balancing, one time cutting each for left and right side) |
Pitch time (V type cutter) |
15~17 S/PC ( balancing, one time cutting each for left and right side) |
Residual unbalance value |
Chinese standard 6.3 Grade |
Machine dimension |
2000 X 1000 X 1800mm |