Double flyer rotor copper bobbin coil winding machine
ND-ZB-2G double flyer rotor copper bobbin coil winding machine is special designed for winding even slots armature. It is applicable for slot or hook commutator.
Working priciple:
By synchronization mechanism of double flyer and 2 PCS 3 phase asynchronous motors, they could make the flyers turn opposite at the same time. While the machine running, the rotor is fixed by 2 PCS winding tools and clamping device, the wires go through wire release and tightening device into sleeve and go out by sliding wheel to wire guiding wheel, then insert to wire slot. Meanwhile, opposite winding at each side could keep the coils to be in the rotor.
Machine features
Machine operation is controlled by PLC, its automatic indexing is driven by servo system and MITSUBISHI stepless speed regulator obtains full function to convenient operator.
The fixture loading takes use of cylinder and working table concerning.
Counting signal is supervised by hall sensor.
Technical parameter:
Central height |
160mm |
Max rotor OD |
60mm |
Speed regulating mode |
Stepless speed regulating |
Main spindle speed |
0~1400r/min |
Display |
HMI |
Start mode |
Manual |
Power |
750W 1400r/min, 50Hz/60Hz |
Air source pressure |
0.5~0.7MPa |
Speed-up time |
0.5s (customizable) |
Input voltage |
220V+/-10% |
Dimension |
1100× 500× 670 mm |