ND-ZB-3G single flyer winding machine is special designed for winding odd slots armature. It is applicable for slot and hook commutator.
Working principle:
By 1 PC 3 phase asynchronous motor control, the flyer will rotate forward and reverse alternately. While the machine running, the rotor is fixed by winding tool and clamping device, the wire go through wire release and tightening device into sleeve to guiding wheel, then insert to wire slot, so that keep the coils to be in the rotor.
Machine operation is controlled by PLC, its automatic indexing is driven by servo system and MITSUBISHI stepless speed regulator obtains full function to convenient operator.
The fixture loading takes use of cylinder and working table concerning.
Counting signal is supervised by hall sensor.
Technical parameter:
Central height |
160mm |
Max rotor OD |
60mm |
Speed regulating mode |
Stepless speed regulating |
Main spindle speed |
0~1400r/min |
Display |
HMI |
Start mode |
Manual |
Power |
750W 1400r/min, 50Hz/60Hz |
Air source pressure |
0.5~0.7MPa |
Speed-up time |
0.5s (customizable) |
Input voltage |
220V+/-10% |
Dimension |
1100× 500× 670 mm |
Competitive advantages
Variety of application, easy operation.
We have Overseas Service Center.
Machine is controlled by PLC. All the parameter can be set in the touch screen.
It is suitable for stators with different model number and dimension.
The operation and tooling change process is easy.
We could customize machine for our customer as per their requirement.
We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.