Quick Detail:
1. This machine has two winding flyers,.
2. It can automatically winding.
3. This machine is suitable for wire diameter range 0.08-1.08mm
Description:
Double flyer Armature Wire Winding Machine is used for even number slot motor wire winding.It is special designed for winding even slots armature. It is applicable for slot or hook commutator.It adopts Japanese frequency speed adjustment, low rise and accelerating, numeric code dialing setting operation speed and deceleration speed ahead, breaking and location accurate, foot stepping to loose tooling, automatic closing tooling. Easy operating, and save more labor.
Working priciple:
By synchronization mechanism of double flyer and 2 PCS 3 phase asynchronous motors, they could make the flyers turn opposite at the same time. While the machine running, the rotor is fixed by 2 PCS winding tools and clamping device, the wires go through wire release and tightening device into sleeve and go out by sliding wheel to wire guiding wheel, then insert to wire slot. Meanwhile, opposite winding at each side could keep the coils to be in the rotor.
Asynchronous motor controls the winding, counter is for turns counting, and manual positioning.
Technical parameter:
Armature diameter |
≤60mm |
Stack length |
≤100mm |
Wire diameter |
0.1~1.08mm |
Shaft length |
170mm |
Advance Turns |
0-9 |
Per-set Turns |
0-9999 |
Rotation Speed |
0-1400r/min |
Power supply voltage |
220V±10% 50Hz |
Air source pressure |
0.5~0.7MPa |
Spindle motor power |
0.75KW |