Biaxial structure fiberglass flow mat is a stitch bonded composite reinforcement fabric containing a PP layer inside the fabric. The fabric consists of 4 layers: a PP non-woven layer in the middle, and chopped strands on one side of the PP layer, and roving in 0 and 90 degree on the other side.
It comes from a combination of the flow medium of the core and the Biaxial structure. It is assembled in a single stitching process. It is designed for the production of composite parts that require a structural element, while at the same time optimizing the resin flow. In particular, it may be used in wind turbine nacelles, bus roofs, and other industrial parts.
It Improves the mechanical properties of the parts (in terms of torsion, tensile strength, and compression) by the addition of the biaxial. A biaxial provides better mechanical performance than a fabric. (As there is no take-up, there is less resin between the fibers. )
Enables improvement of the surface aspect and chemical resistance due to the addition of a veil.
Technical Data:
Id |
Layer |
Unit |
1 |
2 |
3 |
4 |
Stitching |
2.1 |
Fibre orientation |
Degrees |
0 |
90 |
Non-woven |
CS |
|
2.2 |
Nominal area weight |
g/m² |
300±5% |
300±5% |
180±5% |
600±5% |
10 |
2.3 |
Roving/yarn weight |
tex |
1200±60 |
1200 ± 60 |
- |
33 subtex |
150 dtex |
2.5 |
Av. filament diameter |
um |
17 |
17 |
- |
13 |
Polyester(textured) |
2.6 |
Roving type |
- |
Direct roving |
Direct roving |
- |
Assembled roving |
|
2.7 |
Resin compatibility |
|
UP, VE |
UP, VE |
|
UP, VE |
|
2.8 |
Stitching type |
|
|
|
|
|
Tricot, chain |
2.9 |
Space between needles |
|
|
|
|
|
Gauge 7 |
2.10 |
Stitching length |
|
|
|
|
|
4.0mm |
Packing & Storage:
Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.
The pallet shall no be higher than 2 layers.
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.
Picture of Product:
CHANGZHOU UTEK COMPOSITE COMPANY CO.,LTD |
COMPANY INTRODUCTION: |
Company Name |
CHANGZHOU UTEK COMPOSITE CO.,LTD |
Address |
Fuhanyuan 1-814,Taihu Road,Changzhou,Jiangsu,China |
Contact Person |
Name |
Tel |
|
Manger |
Gong Xiaojun |
0086 13357899376 |
|
Manger |
Irene Xi |
0086 13961156380 |
|
Business Condition |
Manufacture |
Trading |
Consititution of company |
Pvt.Ltd |
Annual turnover |
USD10,000,000 |
Company Occupy Areas(M2) |
3000M2 |
Shower room Occupy Areas(M2) |
200M2 |
website |
www.utekcomposite.com |
http://utekcomposites.en.made-in-china.com/ |
Mainly Customer & Marketing |
Europe,Asia,America,Middle East |
Mainly Product |
Fiberglass chopped strand mat (powder and emulsion), stitch mat, combo mat, uni-direction and biaxial fabric, RTM core mat, woven roving, special products like Ar-glass roving, chopped strand, thin fiberglass fabric, SMC(sheet molding compound), fiberglass/polyester geogrid and geocomposite. fiberglass mica fabric for insulation. |
Sales Team |
15(University Graduates) |
Product Team |
150 |
Research & Development Team |
12 |
QC Team |
8 |
Certificate |
ISO 9001 ,ISO 14001 ,SGS |
Give us a chance, and we' ll return you with satisfaction.