Frosted Hard Helmet for Miner (SM017)
Size: Adjustable
Color: Blue, yellow, white, red
Product description:
UV high density polypropylene helmet. With polyethylene lining material, perspiration, socket type hoop after adjustment.
Material: PE
Weight: 334 g
Directions for use:
Safety helmet to absorb the impact of energy released, this hat will generate partial damage or damage cap shell and cap lining, even if the damage can't immediately find, recommend replacing by severe impact of the helmet.
In order to ensure sufficient protection performance, safety helmet should adjust to fit the head size. Users, please note that in addition to the helmet manufacturers recommend changes and remove the components, any change or remove any parts may cause dangerous risks. Hard hat should not add any non helmet manufacturers recommend attachments. Ban on the helmet use the manufacturers recommend paint, solvents, adhesives or label and so on. In order to guarantee the effective protection, the peak should be forward (straight), through the ratchet wheel control system at the back of the helmet (size: 53-63 - cm), adjust the helmet to adapt it to the head size (not too loose or extrusion).
Disable:
Prohibited in the above shows that by using this product. Hard life affected by many factors, such as cold, heat, chemicals, sunshine and improper use, etc. To do daily check, to identify the security cap helmets, cap lining or fragile accessories for cracks, defects such as signs. If a whack a helmet or wear and should be replaced immediately. If there is no defect, then the safety helmet can be used. The manufacturing date label within each hat. In the case of normal use, after the first use of helmets will provide two to three years of effective protection; Or after production can provide effective protection for five years. The helmet does not contain substances cause allergic reactions. If sensitive people group produce allergic reaction, should leave the danger zone, took his helmet, consult your doctor.
Storage instructions:
If no longer use or product transit, helmet should be stored in a cool, dry place, avoid light frost. Avoid chemicals or sharp objects falling on it, cause a safety helmet damage deformation.
Cleaning/maintenance instructions:
The helmet usable DIP in with low concentration detergent cloth to wipe. It is prohibited to use any wear and tear ", corrosive chemicals. If the helmet can't use this method to clean, please replace.
Performance:
The helmet in line with the European directive 89/686, safe, comfortable, breathable and comply with European standard EN397: 1995 / A1.