Add to My Basket You can manage your basket in member center
blow molding machine Main Characteristic:
1. Two station, single layer, 55mm screw, 7.5kw motor, PE / PP etc.
2. Power supply: 380VAC, 50Hz (depending on client's county ).
3. Different Die Head for Choosing:
One die head (500ml-1L): 1L around 400 bottles per hour
Two die head (250ml-500ml): 500ml around 1000 bottles per hour
Three die head( under 250ml): 250ml around 2000 bottles per hour
4. Center Distance: Two Die head: 120mm, Three Die head: 80mm
5. Deflashing system: Neck/ handle/ bottom deflashing. Fully automatic.
6. MOOG 100 Points Parison Controller (Optional)
1. Reply the email and take action in 24 hours;
2. 100% Quality inspection before the shipment;
3. Can trainning clients operator for free in seller`s factory
4. Engineer overseas is avilable
5. Blowing mould and injection mould made orginal
6. Auxiliary machines for complate line.
7.Custimized design as requirements.
|Diameter of screw stem||mm||55|
|L/D of screw stem||-------||23:1|
|Number of moulds||set||2|
|Mould thickness scope||mm||120-150|
|Max. clamping force||KN||40|
|Pressure of air source||Mpa||0.6|
|Air consumption||m 3 /min||0.5|
|Water consumption||m 3 /h||1.0|
|Dimension||m||2.4 × 1.6 × 1.8|