High Quality Needle BearingTrack Roller Bearing CF30--1

Welcome to Jinan Yuelong Bearing Co., Ltd.

Jinan Yuelong (LBR) bearing   Co., Ltdis  a professional bearing manufacturer .  our company have a large number stock, include: Deep groove bearing, Cylindrical roller bearing, Self-aligning bearing, Self-aligning roller bearing, Needle bearing, Angular-contact ball bearing, Tapered roller bearing, Thrust ball bearing, Thrust self-aligning roller bearing, Thrust cylindrical roller bearing, Liner bearing, Liner guides, Articulated bearing and so on. our products use for industry, machinery, rolling mill, textile process, railway, metallurgy and mine, and we can provide complement for them, Technical support at any time.  

 Quality Gurantee of track roller  bearing : 

 You can replace or refund the products beacause of quality problem within one year after the date you get them.

 Our Advantages in the line of  track roller bearing 

 1. Many years bearing products manufacturing and exporting experiences.

2. OEM order and non-standard bearing order can be accepted.

3. Many sizes of bearing are available. Large quantity bearing can be provided.

4. To respect customers, you can choose the loading port.

5. A certain number of free sample can be provide to support our customer's after-sale services and warranty.

 Introduction of Cam Follower Needle Bearing

While roller cam followers are similar to roller bearings, there are quite a few differences. Standard ball and roller bearings are designed to be pressed into a rigid housing, which provides circumferential support. This keeps the outer race from deforming, so the race cross-section is relatively thin. In the case of cam followers the outer race is loaded at a single point, so the outer race needs a thicker cross-section to reduce deformation. However, in order to facilitate this roller diameter must be decreased, which also decreases the dynamic bearing capacity.

End plates are used to contain the needles or bearing axially. On stud style followers one of the end plates is integrated into the inner race/stud; the other is pressed onto the stud up to a shoulder on the inner race. The inner race is induction hardened so that the stud remains soft if modifications need to be made. On yoke style followers the end plates are penned or pressed onto the inner race or liquid metal injected onto the inner race. The inner race is either induction hardened or through hardened.

Another difference is that a lubrication hole is provided to re-lubricate the follower periodically. A hole is provided at both ends of the stud for lubrication. They also usually have a black oxide finish to help reduce corrosion.