Foldable and Remote Control Roadblock
Main parts of Roadblock adopts high strength, high tensity engineering plastic;
The needle use Nitrogen stainless steel pipe;
Characteristic: assemble in advance, recycling, safety and effective, strong adaptability, light
weight, easy to carry, convenient to use, large coverage, waterproof.
The roadblock is foldable, each set of roadblock have a small white remote controller.
It can control roadblock under the range of 150 Meter. When you press remote controller,
the needles will stand up and insert into tires when the cars pass, after the cars move ahead 20 Meters,
4 tires will be shrunken, but cannot cause tire burst, which not only keep driver safety,
but also will let the cars stop within 200M. Then press remote controller again,
the needles will retraction and keep other cars to be safe to pass
3, Technical Parameters
1) control segment of electronic
electric quantity is not enough:
When the battery(DC 12V) is under normal using voltage,
the red LED and inner buzzer will flash and tingle with interval 1 second.
When the electric quantity is not enough,
please charge it in time in case of any damage or influence the normal using.
2) mechanical drive part
The size of single section of Main part of Roadblock:712mm length X 185mm width X 24mm thickness.
The weight of single section:1.3 kg.
The effective length of roadblock: 5M
Totally 7 sections
3)The structure is mechanical control drive. Working voltage is DC 12V.
4)main power supply is AC 220V charger and cigarette lighter,
emergency power supply is 1 unit 12V battery.
5)The roadblock adopts remote controller control motor.
the effective distance is 100M(open field),speed of remote control≤1 times/second.
6)space between Deflated needles 43.5-60.5mm<75mm.
7)the volume of deflated needles is 600×340×210mm.
The weight is 20KG, instant load-bearing is 20T.
8) Main parts of Roadblock adopts high strength,
high tensity engineering plastic;
The needle use Nitrogen stainless steel pipe;
The effective length of needle is 25mm
4, Announcements
1) only can turn on power supply into the work state after roadblock spread completely.
2) Only can turn off power switch after all needles are retraction.
3)Please do not let the wheels stop on the reduction plate
for a long time when you inspect cars
4)Keep the reduction plate to be straight,
which can reduce the loss when electrical machine working.
5) need to clear the rubbish, leaves in the holes of reduction plate usually.
To reduce the resistance when thee electrical machine working
by turning over the roadblock and step on it lightly .
6) do not put it in the water for a long time in the rainy day
in case there some sundries blocking reduction plate
by drifting and influence the normal working of spindle.
Please clear the sundries in time when it finishes raining.
Charge it in time when the electricity is not enough
5, packing details
1) carton size:905mm×242mm×124mm
2 Gross weight:15KG