Lab Thermal Shock Test Chamber

Thermal shock test chamber is used to test most commercial products to see how they withstand drastic temperature changes. A thermal shock chamber will subject a product to the most extreme temperature conditions, instantly.

The purpose of testing a product under these circumstances by the Thermal shock test chamber is to observe changes in the products characteristics and check for failure occurrence of different materials and thermal expansion coefficients.
 
  Model   HD-216TST
  Interal Dimension   (W× H× D) 60× 60× 60cm
  Outside dimension   170× 225× 182cm
  Structure   Three chambers design(the hot chamber, the cold chamber and the testing chamber)
  Damper device   Forced air drived damper
  Interior material   SUS#304 Stainless steel plate
  Exterior material   SUS#304 Stainless steel plate
  Basket material   SUS#304 Stainless steel plate
  Refrigeration   Cascade refrigeration system
  Cooling method   Air or Water
  Ambient temperature   0  centigrade degrees to 30centigrade degrees
  Preheating temperature   +60.00centigrade degrees to +200.00centigrade degrees
  Precooling temperature   -10.00centigrade degrees to -70.00centigrade degrees
  H. T. Shocking   +60.00centigrade degrees to +150.00centigrade degrees
  L. T. Shocking   -10.00centigrade degrees to -65.00centigrade degrees
  Temperature uniformity   ± 2.00centigrade degrees
  Simulated load ic   5.0kg
  HT IN-Zone   -65.00 centigrade degrees to +150.00centigrade degrees/5min
  LT IN-Zone   +150.00centigrade degrees to -65.00centigrade degrees
  Preheating time   30MIN
  Precooling time   60MIN
  Senor   T× 4
  Controller   OYO-8226
  Setting range   Temperature: -100.00centigrade degrees to +200.00centigrade degrees
  TIME: OHIM to 999H/CYCLE: 0 to 9999
  Resolution   Temperature: 0.1centigrade degrees
  Output mode   PID+SSR (control method)
  Power(K. W)   AC380V 50HZ 30KW