Supplier Details
Add to My Basket You can manage your basket in member center
Model | CJY | |||||
CJSB CJYC | ||||||
CAPACITIES | Max.swing over bed | Φ500mm | Φ660mm | Φ800mm | ||
Max.swing over Cross side | Φ300mm | Φ420mm | Φ560mm | |||
Center distance | 1000mm(40″) 1500mm(600″) 2000mm(80″) 3000mm(118″) | |||||
Max.swing over gap | Φ710(28″) | Φ870(34″) | Φ1010(40″) | |||
Effective length of gap | 230mm(9″) | |||||
Bed width | 405mm | |||||
HEADSTOCK | Spindle hole | B model:Φ82mm C model:Φ105mm | ||||
Spindle nose | D8 | |||||
Spindle taper | B:90mm 1:20 C:113mm 1:20 | |||||
Spindle speeds(Number) | B:9~1600r.p.m(24) B:8~1400r.p.m(24steps) | |||||
C:36~1600r.p.m(12steps) C:30~1400r.p.m(12steps) | ||||||
FEEDS | Metric threads range(Kinds) | B:1~224mm/48 C:1~14mm/22kinds | ||||
Inch threads range(Kinds) | B:72~1/8T.P.L/48 C:28~2T.P.L/26kinds | |||||
Moudle threads range(Kinds) | B:0.5~112/42 C:0.5~7mm/18kinds | |||||
Diametral threads range(Kinds) | B:56~1/4 D.P/45 C:56~4 D.P/24kinds | |||||
Longitudinal feeds range | 0.063-2.52(0.023″-0.937″) | |||||
Cross feeds range | 0.027-1.07(0.011″-0.404″) | |||||
Leadscrew size:Diameter pitch | Φ40mm/12mm 12.7mm | |||||
CARRIACGE | Cross side travel | 360mm(14-3/16″) | ||||
Compound rest travel | 145mm(5-3/4″) | |||||
Cross-section size of toolshank | 25*25mm(1″*1″) | |||||
TAILSTOCK | Taper of tailstock sleeve | M.T.NO.5 | ||||
Diameter of tailstock sleeve | Φ75mm(2-61/64″) | |||||
Travel of tailstock sleeve | 150mm(5-29/32″) | |||||
MOTOR | Main drive motor | 5.5kw/7.5kw | ||||
PACKING SIZE(L*W*H) | ||||||
Center distance: 1500mm | 3000*1150*1800mm | |||||
2000mm | 3500*1150*1800mm | |||||
3000mm | 4500*1150*1800mm | |||||
Net weight/Gross Weight(kgs) | ||||||
Center distance: 1500mm | 3150/3800kgs | 3500/4150kgs | 3650/4300kgs | |||
2000mm | 3400/4100kgs | 4000/4700kgs | 4200/4900kgs | |||
3000mm | 4500/5250kgs | 4750/4820kgs | ||||
STANDARD ACCESSORIES | OPTIONAL ACCESSORIES | |||||
1.3-jaw chunck | 1.Steady rest | 5.Live center | ||||
2.Driving plate | 2.Follower rest | 6.Quick change toolpost | ||||
3.Center¢er sleeve | 3.4-jaw chuck | 7.Taper copy ruller | ||||
4.Wrenches | 4.Face plate | 8.Thread dial | ||||
5.Oil gun | ||||||
6.Operation manual | ||||||
1.Steady rest | 5.Live center | |||||
2.Follower rest | 6.Quick change toolpost | |||||
3.4-jaw chuck | 7.Taper copy ruller | |||||
4.Face plate | 8.Thread dial |